Simple Tips on Bottling Your Beer

Bottling your beer can be a fun activity but it is also a very tedious task. It is good to see your brew finally coming through but then there is the difficult task of bottling and then capping them with the beer bottle tops for sale. This is usually a long and tiresome process but if you do it right and brand and package your beer in the right away, you can finally take a deep breath for a job well done. Getting the bottling or packaging wrong can ruin an otherwise exciting brewing experience.

There are several options involved when it comes to packaging your beer. A lot of brewers will prefer kegging the beer but bottling is clearly the better option thanks to the ease compared to kegging, the low cost and the fact it makes it super easy to distribute your beer to friends or customers.

There are so many tasks that are involved when it comes to the bottling day. It is one of the busiest days in your brewery along with the brew day. Some of these activities that you will be undertaking include cleaning the bottles, sanitizing the beer bottles, having a good solution of the priming sugar, transferring the beer, getting the beer bottle tops for sale ready and much more. Before you begin the beer bottling process, it is always important to ensure that the beer is ready for the bottling. If you are an expert brewer, this should be an easy task for you whether you are running a commercial brewery or a small home brewery.

Choosing your beer bottles

When you are thinking about bottling, you must have selected the right types of beer bottles into which you will put the beers in. The large commercial breweries will have new custom bottles manufactured for them as well as the recycled bottles. If you are a small home brewery, having custom beer bottles manufactured for you is not a luxury which you might have so you will most likely use recycled bottles. The bottles must, however, be cleaned and sanitized properly before the beer is placed in them.

Preparation of the bottles

Because beer is quite susceptible to bacteria and other forms of contaminants, it is important to ensure that your work area is properly cleaned before you begin the bottling process. If you are home-brewing, you have to clean the bottles yourself by scrubbing the inside of the bottles thoroughly with the use of a bottle brush. After cleaning, rinse and drain the bottles and then sanitize the bottles. For additional details, visit INTERPACK!

Sanitizing is important to prevent bacteria from getting into the bottles as they may destroy the beer after long term storage. There are a lot of sanitizers that you can use in the market in order to ensure that your bottles are clean and safe.

Capping

After preparing the beer and siphoning it into the bottles, it is now time for capping the bottles ready for sale and distribution. You can buy excellent quality beer bottle tops for sale from http://www.interpack.net.au/ and use this to capper your bottle. This can be done either manually or automatically using machine if you are running a large beer production line.  The company provides the best beer bottle tops that provide a tight seal and keep your beer safe even if it is stored over the long term.

Get Food Garnish Ideas For Great Meals!

Like everyone else, you probably have a repertoire of meals you love to make and eat regularly. Sometimes though, even a dish as beloved as the best Pad Thai recipe you’ve found can start to seem rather dull. The quickest and easiest way to give your favorite foods a fresh new look, smell, and taste is by adding garnishes, so check out the tips and ideas below to help you keep on enjoying your meals!

Pad Thai recipe

Garnishes should be made from something edible. You can say that it literally should be the cherry on top of the ice cream! And like said cherry, the most important thing to consider when choosing a garnish is appropriateness. Choose something that will complement the dish. You wouldn’t want to add minced garlic to a red velvet cake or sprinkle chocolate shavings on your Thai green curry!

Keep in mind the taste and scent of your dish to make sure the garnish you are adding will be appropriate. A Pad Thai recipe, for example, is rarely served without slices of spring onions or a lemon wedge, simply because they work so well with how the dish tastes. Plus, spring onions are rich in vitamins A and K while lemons are high in vitamin C and special phytonutrients, making an already delicious, healthy dish even more nutritious.

Next, consider a garnish that will also add an exotic look to your meal to make it even more enticing. Bread squares, cooked sausage crumbs, cheese cubes or shavings, and thin slices of ham can work very well for soups like Singapore noodles, fresh Italian salads, and lots of entrees like stews and casserole dishes.

Luckily, those concerned about their nutritional intake have plenty of healthy options to choose from. Try to go for brown bread over white, and make sure to go for sausage and ham with little to no fat content. And as for cheese, simply think about what you like most, whether it’s simple cheddar or delicious mozzarella to enhance your enjoyment!

If you’re planning a party, simply adding garnishes can turn your food from looking dull to mouth-wateringly delectable. Let your creative juices flow by using cookie cutters or a good knife, and have fun experimenting with different shapes for your fruits, vegetables, cheese, chocolate bits, and more. An ordinary fruit salad in cream and condensed milk, for example, will look so much more fun if you use a scoop to carve out cute mango balls. Bamboo shoots shaped like leaves will make your Thai curry recipes a definite topic of conversation, and of course pies and cheesecakes will go wonderfully with bits of white and/or dark chocolate sprinkles.

Sometimes when you’re throwing a party or simply cooking up something for yourself, you’re too eager or stressed and want to start right away, but adding garnishes will always be worth it. With the tips and ideas above, hopefully you can turn all your regular dishes, from your exotic Pad Thai recipe to your grandmother’s classic apple pie into something comforting and at the same time offer a new look and taste to whet your appetite every time.

Five Things You Shouldn’t Expect from a Business Consultancy Service

We all have our expectations when it comes to working with a business consultancy service. Sometimes, however, our expectations may be out of sync with reality. If you are planning to get a business consulting firm in UK, here are five key things that you shouldn’t generally look forward to:

Consultancy Service

Consultancy Service

Do not expect a free consultancy service

Consulting firms are businesses just like your business and have staff, business obligations and other expenses to deal with. If you are planning to launch new processes, change processes or in a new position of responsibility and unsure on how to define your needs, simply call a consultant and ask for the fee of executing that. Consultant fees are not costly and depending on the scope of work, it is something that you can certainly afford if you take your business seriously.

Do not expect miracles

When you are hiring a business consultancy service, it is important to be very realistic about what you can achieve. The consulting service is not going to be the magic bullet to years of poor business practices or severe lack of capacity in the business. But it will offer you remedial action that you can use to steer your business in order to ensure a more positive outcome.

The consulting service is usually an intervention that helps you put the brakes on the wrong path so that you can begin the climb to the right path. Depending on several business variables, that climb can be quite short or very long. It is important to put that into perspective when hiring a consulting service. There will be no miracles. You will simply have to make new hard choices in order to steer your business on the right direction.

Do not expect free major changes in the project scope

The definition of the project scope is one of the most important preparatory steps when you are hiring a business consultant. It gives the consultant a clear idea on your business needs and sets of expectations. It also helps the business consultant to price the services accordingly.

If you are going to change the project scope mid-way through the project because you feel you left something critical out, you must expect an increase in the project costs. A good consultant will work out the scope of the project and offer you an estimate of additional addendums to the scope that will emerge in the course of project.

If you are planning to add a whole new project deliverable to the scope of the project, then that may not be reasonable and you will both have to address that and work out the time schedule and costing afresh.

Do not expect consultants to modify reports

The business consulting firm UK will put an honest effort in information gathering, analysis and recommendations in order to come up with what is in your best interest. However hard it is to swallow, this is the information that they will provide you. Do not expect them to bend their ethics and modify this information to suit whatever interests or considerations.

Don’t share the consultant’s work

If a consultancy services in UK provider has prepared a major recommendation paper for you and you have used it successfully, it must remain within your organisation. Do not share it with another organisation. Check more, http://ninefeettall.com,  and The work product is specifically made for your organisation to suit your unique needs. Even if there are similarities, it would be unfair to share the consultant’s work to an organisation that has not paid for the consultant’s services.

Iron Out the Loopholes in Your Safety System

The key to success of your company depends hugely on some of the little things that can easily be ignored. These include things such as safety of your workplace and well being of your workers. When your place is free from danger, confidence is boosted as there is nothing that threatens the well being of your workers as well as yours. However when this is neglected, it becomes a threat making your workers not willing to commit their best. To ensure compliance you need a good health and safety audit NZ can provide.

health and safety audit nz

Being a human right, safety and health is a legal requirement. This means that if you are found not adhering to the stipulated regulations and standards you could be reprimanded no less. Sometimes you could assume that things are okay at face value, but that there could be hidden things that arise safety concerns. An audit is necessary to be carried out in your company to make sure you adhere to the standards of health and safety audit NZ government has set.

Safety and health audits are necessary as they will show you to what level of safety you have achieved. Besides it shows you areas that are necessary to improve. They also expose to you the areas that can be treated as emergency and those areas that can be improved with time.

Besides the audit, it is necessary to have periodic reviews in your company. One such is the annual review. This is not an audit but a way of gauging how balanced and effective your system works. This involves a specialist visiting your company who will assess your health and safety system. It will be followed by a report that gives recommendations upon examining the system. The report simply shows the level at which the system is, and if it is well functioning.

In case of an accident, the Department of Labour conducts its own investigation. However there is need for you also to have the evidence reviewed to establish the facts. Getting the services of a qualified investigator helps you shed light upon such matters that usually cause stress. If the investigations are done by a competent investigator, these have a major impact upon the outcome of the matter at hand. Besides this will help you prevent recurrences and avoid blame games.

It can be quite a daunting task trying to find qualified personnel to conduct a health and safety audit NZ can provide. One that will handle sensitive matters such as accident reviews with competent and integrity.  Health and Safety Systems Limited is a New Zealand company that deals with such matters at workplace. This is done by qualified and excellent personnel that will help you improve your safety hence the confidence of your staff at workplace.

Located in Canterbury, you can walk in and get enlightened on the numerous ways of improving your health and safety in regards to the workplace. A visit to the website also enables you to communicate and learn further from the experts.

AirEng: The Melbourne Industrial Fans Specialists

AirEng Pty Ltd is a large growing supplier of industrial fans, operating from different parts of the world to respond to the need of industrial plants especially within the Asian marketplace. They provide fans that can be used in varying climates such as in desert, high altitude, high humidity, cold sub-polar, and coastal salt-laden air.

They are an industrial (see this: http://en.wikipedia.org/wiki/Industrial) fans Melbourne specialist that promises high energy efficient, durable, low-noise, and stable air flow provider type of fans which are made through computer aided design, modeling and stress analysis. Their reputation as a reliable supplier even increased when they matched the standards given by Australian Standard AS2936, British Standard BS848 and US Air Movement and Control Association Inc. AMCA210 and AMCA310 performance requirements.

They also offer various engineering services such as shaker test, fan performance testing, model Tests, finite element analysis, sound level testing, systems calculations, specialist application work, onsite commissioning, onsite balancing, vibration analysis, and preventative maintenance assessment to meet the specific long term needs of their clients.

The industrial fans Australia products presented by AirEng are centrifugal fans, industrial exhaust fans, commercial exhaust fans, axial fans, specialist fans, and sound control.  AirEng offers different designs of centrifugal fans.

Each centrifugal fan has unique combination of design (design 4000, design 5000, design 5601, design 5701, design 8801, design 9000, design FC, GPB), drive arrangement and type of driver included (electric, turbine, gearbox, pneumatic, combustion). This is because they aim to match every specification a client may need. All centrifugal fans are assured to work with low noise levels, high aerodynamic efficiency, low vibration levels, and solid footprint.

The axial fans provided by AirEng are cost effective, easy to install, and have simplified ducting requirements. It is also available in different styles such as direct drive, belt drive, bifurcated, roof mounted, plate mounted, and flue fans. On the other hand, fertilizer plants as well as minerals processing and metals processing industries can avail the specialistmining ventilation fans which are really designed for industries like them.

The sound control products are the advantage of AirEng to the other companies. They give the solution to the common noise problems of the industries by providing products like acoustic enclosures, absorptive silencers, and reactive silencers.

AirEng offers clients several service and product advantages such as top quality ventilation fans, reduced costs, technical assistance, support material, after sales services and deliveries. Aside from the offered products and services, AirEng also offers troubleshooting of defective fan systems. Their team contains skilled engineers and technicians who will do their best to fix the existing fan system problem.

They are also in partnership with Fume and Dust Control Pty Ltd and Apcema which aims to address common problems in industrial plants just as what the AirEng is committed for.

AirEng is a team of highly committed engineers and technicians who are ready to meet the product and service each industry is looking for. Ventilation fans, centrifugal fans, industrial exhaust fans, and commercial exhaust fans will surely last if they are made from AirEng Pty Ltd, which has a head office located at Factory 8, 981 Mountain Highway, Boronia, Victoria Australia.

8 Reasons to Hire a Professional Logo Designer

There are certain aspects in a business wherein owners prefer to do things themselves in an effort to cut cost. However, if you are a business startup, there is one area in which you shouldn’t venture out yourself – logo design. There is more to logo designing than meets the eye. Your logo is the visual representation of your brand and business. Unless you have massive experience on logo design strategies, it is best to work with a professional logo design Melbourne company to handle this area of your business.

logo design melbourne

Think that professional graphic designers Melbourne has are too expensive? Here are 8 reasons that’ll convince you why they are worth the investment:

1.    The quality is guaranteed. This is the primary reason to invest in a professional business logo design Melbourne has for you. Building a distinct identity is crucial to your business’ growth. Hence, working with qualified professionals will bring you one step closer to launching your business off on the right foot.

2.    It will save you time. Working with amateurs is like a trial-and-error process. When you go through this, you’re wasting away valuable business assets.

3.    You can realize your vision. Contrary to popular belief, hiring someone to do the logo for you will make it easier to realize your idea of what a perfect logo should be. In the end, you’re the one in control and knows what is best for your business.

4.    You can get valuable strategic insight. Rather than asking your friends for feedback on your logo design, a professional graphic design company Melbourne service can give you an honest and expert assessment.

5.    It will make the logo design process more organized. You are leveraging the experience and expertise of these professionals in the logo designing process. Hence, you can speed up the process without compromising on quality.

6.    It makes your business startup less stressful. It is one less thing to worry about. Plus, knowing that the job is done by professionals, you can be rest assured that it is done on time and in your expected quality level.

7.    They take pride in their work. If you’re not happy with the product, their reputation is on the line. Hence, these companies will do everything in their ability to keep you satisfied.

8.    You will have an impactful design on your logo. Professional logo designers acquaint themselves with the consumer psyche and take that into account when designing. Hence, you can guarantee that your logo is created not just for aesthetic purposes but with your target audience in mind.

The logo is a highly important representative of your brand. Hence, you need to be smart when investing in a logo design Melbourne company and choose only a professional with expertise and experience. For this reason, Clark Marketing & Design is the company for you. Their logo design team is made up of expert professionals with years of experience to their name. In addition, the logo designing process combines strategic and creative approaches for a compelling logo that suits your company’s goals. For more details, visit them online at http://www.clarkmarketing.com.au/.

Buying Quality DN Rail Mount Power Supplies in Australia

Planning to buy power supplies online for your industrial application? Power Supplies Australia is one of the leading DIN rail mount power supply and AC-DC power supply providers – with products characterized by superior performance, great cost-effectiveness, and great reliability.

DIN rail mount power supply

DIN rail mount power supply

Moreover, the company’s power supply products are manufactured by one of the leading engineering companies in Taiwan – the Meanwhile Enterprises – which manufactures power supply products for the global market, offering users a great degree of reliability and durability.

Some of the company’s product selections you can purchase from Power Supplies Australia include AC/DC switching power supplies, DC/DC converters, LED drivers, DC/AC inverters, as well as battery chargers.

Power Supply Australia’s power supply systems are used at the highest level of industrial applications. They are applied in factory automations and process control uses across various sectors of the Australian industry.

Industrial enterprises can purchase various modules of these products, including multi-rail enclosed cage modules of rail mount power supplies and single-rail enclosed cage modules.

AC/DC models of the DIN rail power supply come with various power input voltage specifications to fit varied applications, offering you an adjustable output pot that you can use to get a desired output voltage with power LED indicators.

On the other hand, their MDR-10 model offer a full-ranged universal AC input that virtually supports any environment or application area. It also has a DC OK signal and a LED indicator to show that power is on.  You can choose various models for MDR-10, ranging from 5V to 24V DC output.

Their MDR-20 provides a 5-20V range, but with higher amperage. Features are similar to those of MDR-10. Their MDR-40 offers a higher amperage rating of up to 6A with a voltage range of 5-24V, while their MD-100 offers up to 7.5A and designed with a DC OK relay contact – along with an over-temperature protection and a built-in active PFC.

The DR series of their DIN rail mount power supply products come with unique features. DR-15 is isolation Class II with a universal AC input that provides a full-ranged application. It has a LED indicator for power on that comes with a generous 3-year warranty. It delivers an output of up to 2.4A for DR-15-5 (5V/2.4A) or Model 1 as well.

Model 4 offers specifications of 24V/0.63A. With DR-30 of their DIN rail mount power supply, you can achieve a 5V/3A output for Model 1 and a 24V/1.5A output for Model 4 – as well as intermediate output figures in between for Model 2 and 3. DR-45 offers up to 5V/5.0A for Model 1, while DR-75 delivers up to 12V/6.3A for Model 1.

These last two DIM rail amount power supply equipment are also equipped with cooling mechanisms by free air convections. DR-100 delivers 12V/7.5 with over-temperature protection, while DR-120 delivers up to 12V-10A with a 100% fully-loaded burn-in test mechanism.

You can also explore other models such as the MDR-series, the SDR series, the WDR-series, and the DRP-series on Power Supply Australia’s official website. For more information or to buy DIN rail mount power supply online, check out http://www.power-supplies-australia.com.au/din-rail-psu.